Continuous In-Line Annealing Machine for Multi-Wire Intermediate Wire Drawing Machine (8/10/14/16 Wire)

Descripted

tion  These in-line continuous annealing machines for the multi-wire intermediate wire drawing machine is ideal for annealing copper wires, tinned copper wire and 0.4-1.05mm silver-plated copper wires. Machines with in-line resistant annealing consist of in-line annealing, electric control system and cooling fluid circulation system.  

 

characteristics

  1. DC annealing and digital voltage control ensure uniform elongation after wire annealing.

2. Segmented annealing with separate sealed steam protection system and reliable cooling and drying system to ensure high quality wire surface.

3. It is characterized by its high overall performance, these continuous annealing machines are especially suitable for continuous annealing for drivers.

4. Powered by a high quality flat ribbon imported, these machines with annealed in-line resistant has a stable performance and low noise.

5. Compact design for fast installation and energy saving, and advanced design based on advanced equipment.

6. These online continuous annealing machines have a maximum wire drawing speed of 1600m / min.

7. Sufficient supply of spare parts and professional technical support.

8. Anti-corrosive design of the annealing vessel, reduces the cost of maintenance and replacement.

9. 8 wire, 10 wire, 14 wire and 16 wire models are available.

Technical specifications

 

ArticleDTH2000-8Diameter of wireNumber of wiresMechanical maximum speedDie output diameterAnnealing currentMaximum annealing voltageAnnealing powerPower of the steam generatorSteamGeneral size  (L  ×  W  ×  H)General weight  (kg)Speed

Specifications
	DTH2500-14	DTH3000-16
0.6 ~ 2.78 mm × 8	0.6 ~ 2.78 mm × 8	0.6 ~ 1.6 mm × 2 wires
8	14	16
1800m / min	1800m / min	1800m / min
14mm	14mm	14mm
DC 2000A	DC 2500A	DC 3000A
DC 60V		DC 60V
200kVA	230kVA	280kVA
18kW	18kW	18kW
17kg / h	17kg / h	17kg / h
2170 × 1100 × 2380mm	2170 × 1200 × 2380mm	2170 × 1200 × 2380mm
3000kg	3300kg	3500kg

Annealed wire size0.5mm0.7mm0.8mm1.05mm 

Speed  (m / min)	Elongation after re-cooking
1200	25  ~ 33%
780	25  ~ 33%
680	25  ~ 33%
550	25  ~ 33%

Operational needs

  1. Make sure that the workshop has enough space, with a minimum height of 4-5 meters.

2. It is convenient to supply the raw material nearby.

3. Qualified personnel is maintained for the installation, operation and maintenance of this high speed bus breakdown machine.

4. Well sealed annealed liquid circulation line.

5. You are online continuous annealing machines require stable and sufficient water, power and supply of compressed air.

6. Our machines with heavy duty in-line annealing works together with a 10 ton (minimum) crane, steam generator, air compressor, braided wire, wire drawing dies, wire drawing lubricant, gear oil and thermal exchanger.

Note

 1. Please consult your own requirements in the production capacity when you choose this machine.2. These continuous in-line annealing machines are not suitable for annealing aluminum rods and aluminum alloy, such as carbon steel rods and stainless steel rods.

3. Please perform daily maintenance according to the requirements.

Cas

or In November 2015, continuous copper annealing machines were installed at MEGA Cable Company,   Malaysia.